Communal & Emergency Lighting Maintenance in Hertfordshire & Bedfordshire
Electrical Services
Penmilne maintains communal and emergency lighting for landlords, managing agents, housing associations and local authorities across Hertfordshire, Bedfordshire, Cambridgeshire and Buckinghamshire. Our NICEIC-approved engineers carry out documented monthly flick tests, annual full-duration drain-down tests, remedial repairs and LED upgrades, and keep log books up to date for your fire risk assessment.
NICEIC Approved Contractor, TrustMark endorsed, Aico Platinum Partner, ECA member and CHAS accredited. Serving Hertfordshire, Bedfordshire, Cambridgeshire and Buckinghamshire from our Hitchin premises since 1977.
What does communal lighting maintenance include?
- Monthly functional (flick) tests of emergency lighting
- Annual full-duration drain-down tests
- Log book records and test certificates
- Replacement of failed lamps, batteries and fittings
- LED upgrades for stairwells, corridors and car parks
- Photocell, timer and sensor checks for communal and external lighting
Regular visits keep common areas safe for residents and give landlords and managing agents the records they need for fire risk assessments and insurers.
How often should emergency lighting be tested?
BS 5266-1 recommends a short functional test every month and a full-duration test once a year, with the results recorded in a log book. The Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to keep emergency lighting in common parts maintained and in good working order.
| Check | What it involves |
|---|---|
| Monthly functional (flick) test | A short simulated mains failure to confirm each fitting switches to battery |
| Annual full-duration test | Fittings run on battery for their full rated duration, usually three hours |
| Log book | Every test, fault and repair recorded and kept available for inspection |
| Remedial works | Failed batteries, lamps or fittings replaced and retested |
Why upgrade communal lighting to LED?
Stairwells, corridors and car parks are often lit for long hours, which makes older fluorescent and halogen fittings expensive to run and maintain. LED fittings use less energy, last far longer and can be paired with presence detection and photocells, so lights only run when they are needed and fewer maintenance visits are required.
How do landlords and managing agents work with Penmilne?
Penmilne agrees a schedule of planned visits for each building, arranges access around residents and provides a written record after every visit. Any faults are reported with a clear quotation for remedial works, and certification is issued for your compliance records. As a CHAS accredited contractor and ECA member, Penmilne can supply the health and safety documentation that managing agents and insurers expect.
Communal lighting questions answered
The responsible person under the Regulatory Reform (Fire Safety) Order 2005. That is usually the landlord, freeholder, managing agent or residents’ management company for the building.
A short monthly test that simulates a mains failure so each emergency fitting switches to its battery. It confirms every lamp lights, and the result is recorded in the log book.
Each emergency fitting runs on battery for its full rated duration, usually three hours, to confirm the batteries still hold their charge. Fittings then need time to recharge, so tests are planned for daytime.
Yes. Penmilne quotes for any failed batteries, lamps or fittings after each visit, then completes the work and retests so the system is back in good working order.
Penmilne maintains communal lighting within a 30-mile radius of Hitchin across Hertfordshire, Bedfordshire, Cambridgeshire and Buckinghamshire.